Trailer specification features may vary based upon model year, trailer type and location. Equipment is subject to availability at each location.
Sheet & Post Van
48 ft
Spring-Ride, Roll-Door
Equipment Specifications
| Dimensions | Metric | Imperial |
|---|---|---|
| Overall Length | 14.63 m | 48′ |
| Overall Width | 2,591 mm | 102” |
| Overall Frame Width | 2,591 mm | 102” |
| Overall Height | 4,115 mm | 13′ 6” |
| Coupler Height | 1,194 mm | 47” |
| Kingpin Setting | 914 mm | 36” |
| Dock Height | 1,270 mm | 50” |
| Inside Width (at liner) | 2,515 mm | 99” |
| Inside Height | 2,794 mm | 110” |
| Cubic Capacity | 101.09 m3 | 3,570 ft3 |
| Weight (+/- 3%) | 6,260 kg | 13,800 lbs |
| Door Opening | Metric | Imperial |
|---|---|---|
| Width (in) | 2,388 mm | 94” |
| Height (in) | 2,642 mm | 104” |
| Mechanics | ||
|---|---|---|
| Suspension | Full slide range, variable-position tandem axles with spring-ride suspension. | |
| Axles | 1/2″ axle wall, 22,500 lb. capacity with synthetic wheel-end lubricant | |
| Tires | 295/75R 22.5 premium radial tires | |
| Wheels | 8.25″ x 22.5″ steel hub-piloted wheels | |
| Brakes | 16-1/2″ x 7″ x 3/4″ s-cam, quick-change brake shoes | |
| ABS | 2 sensor / 1 modulator-valve system | |
| Upper Coupler | AAR certified coupler with 1/4″ pick-up plate and 5/16″ 5th-wheel plate. Interior coupler surfaces sealed with corrosion resistant coating | |
| Crossmembers | 4″ steel I-beam crossmembers on 12″ centers with additional crossmembers at rear on 8″ centers. Inverted-hat crossmembers from landing gear forward | |
| Landing Gear | AAR certified, 2-speed landing gear with internal gearbox and tilt-cushion sand shoes. 5 crossmember mount | |
| Posts | Galvanized steel posts on 24″ centers, 12″ or 16″ centers from landing gear forward | |
| Cargo Control | 1 row of “E” track (full length, both sides) located 48″ from floor | |
| Roof | One piece translucent roof with 30% translucency | |
| Floor | 1-3/8″ laminated hardwood floor secured by 3 screws per board at each crossmember | |
| Scuff | 12″ fluted aluminum side scuff-liner with a 12″ Flat Steel Plate in nose of trailer | |
| Rear Doors | 3/4″ plastic coated roll-door with 60″ door-track protectors | |
| Lights & Wiring | Sealed-beam lights with a fully sealed wiring harness and internal ground | |
| Electrical Connections | 7-way ATA plug with no circuit breakers | |
| Air Connections | Swivel gladhands mounted on roadside | |
